Device Image
.png?width=250)
Device Identification
- Device name: Shelly Dimmer 0/1-10V PM Gen3
- Device model: S3DM-0010WW
- Device SSID: Shelly0110DimG3-XXXXXXXXXXXX
- BLE Model ID: 0x1072
Short Description
The Shelly Dimmer 0/1-10V PM Gen3 is a smart dimming controller that enables remote control of dimmable drivers via mobile phone, tablet, PC, or home automation systems. It can operate standalone in a local Wi-Fi network or be managed through cloud-based home automation services. The device is a current sourcing controller supporting both 0–10V and 1–10V driver types.
Main Features
- Bluetooth: Complies with Bluetooth standard for short-range data exchange.
- BLE Gateway: Enables communication between BLE and Wi-Fi-enabled devices.
- Wi-Fi: Connects to wireless networks.
- Wi-Fi Range Extender: Repeats and extends Wi-Fi signal reach.
- Scripting: Supports automation via user-defined scripts.
- Basic Schedules: Weekly schedules with customizable brightness, transition duration, and flip value.
- Advanced Schedules: Year-round detailed scheduling with time adjustments from seconds to months, including brightness, transition duration, and flip settings.
- Shelly Plus Add-On Compatible: Can connect to Shelly Plus sensor interfaces.
- Auto On/Off Timers: Supports automatic on/off timing.
- Local Actions: Enables local automation within the Wi-Fi network.
- Webhooks: Lightweight, event-driven integration with other devices.
- Compatibility: Fully compatible with third-party home automation platforms.
- No Hub Required: Works locally or remotely via Shelly Smart Control or third-party systems.
- Activity Log: Stores detailed event history.
- KVS (Key-Value Storage): Persistent storage for key-value pairs.
- Customizable Thresholds & Offsets (when used with Plus Add-on): Adjustable temperature, humidity, and light thresholds.
- Safety: Overcurrent, overvoltage, and overpower protection.
- Power Measurement: Accurate monitoring of voltage (V), current (A), and power consumption (W).
- Diverse Driver Integration: Supports 0–10V and 1–10V drivers (lights, motors, valves, etc.).
- Night Mode: Sets reduced brightness during nighttime.
If night mode brightness < min_brightness_on_toggle, then min_brightness_on_toggle is applied.
- Switch/Button Input Mode: Flexible input control using switches/buttons:
- One-button dimming control
- Dual-button dimming control
- Transition Duration: Controls dimming time from 0% to 100% (on) and 100% to 0% (off).
- Minimum Brightness on Toggle On: Applies minimum brightness (default: 3%) when turning on if current level is below threshold. Not applied during custom transitions in schedules/actions.
- Min/Max Brightness: Adjusts dimming range for finer control.
- Button Fade Rate: Controls how quickly output changes while holding buttons (default: 3x).
- Button Presets: Sets state on double-click (default: 100%).
- Virtual Components: Dynamically created components not physically present in the device.
Main Applications
- Residential
- MDU (Multi Dwelling Units – apartments, condos, hotels, etc.)
- Light Commercial (small offices, retail stores, restaurants, gas stations, etc.)
- Government/Municipal
- University/College
Use Cases
- Control dimmable lights within the 0–10 V range for optimal brightness.
- Create smart schedules for automatic brightness adjustment throughout the day.
- Retrofit existing lighting systems using the Dimmer 0/1-10V PM Gen3 while retaining current switches.
- Sync lights with sunrise/sunset times via smart scheduling.
- Enable night mode for lower brightness during nighttime hours.
- Integrate with third-party systems like Home Assistant, Google Home, Alexa, and SmartThings.
- Dim lights up/down with single or double button presses.
- Monitor and manage energy usage of connected lights.
Integrations
Amazon Alexa Supported Capabilities
Yes
Google Smart Home Supported Traits
Yes
Samsung SmartThings Supported Capabilities
Yes
Simplified Internal Schematics
Device Electrical Interfaces
Inputs
- 2 switch/button inputs on screw terminals: S1 and S2
- 2 power supply inputs on screw terminals: N (Neutral) and L (Live)
Outputs
- 2 × 0–10V outputs on screw terminals: + and –
- 1 relay output with power measurement on screw terminal
Add-on Interface
- Shelly proprietary serial interface
⚠ CAUTION! High voltage present on add-on interface when device is powered!
Connectivity
- Wi-Fi
- Bluetooth
Safety Function
- Overheating protection
- Overvoltage protection
- Overcurrent protection
- Overpower protection
Supported Load Types
- 0–10V signal control (for lights, motors, valves, etc.)
- 1–10V signal control
User Interface
Inputs
- One (Control) Button
- Press and hold for 5 seconds: Enables Device Access Point and Bluetooth connection.
- Press and hold for 10 seconds: Performs factory reset.
Outputs
- LED (Monochrome Indicator)
| Status | LED Behavior |
|---|---|
| AP enabled, Wi-Fi disabled | 1 sec ON / 1 sec OFF |
| Wi-Fi enabled, not connected | 1 sec ON / 3 sec OFF |
| Connected to Wi-Fi network | Constantly ON |
| Cloud enabled, not connected | 1 sec ON / 5 sec OFF |
| Connected to Shelly Cloud | Constantly ON |
| OTA Update in progress | ½ sec ON / ½ sec OFF |
| Button held for 5 seconds | ½ sec ON / ½ sec OFF |
| Button held for 10 seconds | ¼ sec ON / ¼ sec OFF |
Note: States are prioritized from top to bottom; each subsequent state overrides the previous one.
Specifications
| Category | Quantity | Value |
|---|---|---|
| Physical | Size (H×W×D) | 38.5×43.5×17 mm / 1.52×1.71×0.67 in |
| Weight | 28.5 g / 0.99 oz | |
| Screw terminals max torque | 0.4 Nm / 3.5 lbin | |
| Conductor cross section | 0.5 to 4 mm² / 20 to 11 AWG (solid, stranded, bootlace ferrules) | |
| Conductor stripped length | 5 to 6 mm / 0.20 to 0.24 in | |
| Mounting | Wall console / behind wall / ceiling construction | |
| Shell material | Plastic | |
| Shell color | Pantone 2736C (blue), Print: White | |
| Connector color | Black | |
| Environmental | Ambient working temperature | -20 °C to 40 °C / -5 °F to 105 °F |
| Humidity | 30 % to 70 % RH | |
| Max altitude | 2000 m / 6562 ft | |
| Electrical | Power supply | 110–240 V~ 50/60 Hz |
| Power consumption | < 1.5 W | |
| Neutral required | No | |
| Voltage control type | Current sourcing | |
| External protection | 16 A, tripping characteristic B or C, 6 kA interrupting rating, Energy limiting class 3 | |
| Output Circuit Ratings | Max switching voltage | 240 V~ |
| Max switching current | 13 A | |
| Max control current | 35 mA | |
| Sensors, Meters | Voltmeter (AC) | 110 V – 240 V |
| Voltmeter accuracy | ±10 % | |
| Ammeter (AC) | 50 mA – 16 A | |
| Ammeter accuracy | ±10 % | |
| Power & energy meters | Active/apparent power, active/apparent energy, power factor | |
| Measurement data storage | No | |
| Internal temperature sensor | Yes | |
| Radio | Wi-Fi Protocol | 802.11 b/g/n |
| RF Band | 2401 – 2495 MHz | |
| Max RF Power | < 20 dBm | |
| Range | Up to 30 m indoors / 50 m outdoors (varies by conditions) | |
| Bluetooth Protocol | 4.2 | |
| RF Band | 2400 – 2483.5 MHz | |
| Max RF Power | < 4 dBm | |
| Range | Up to 10 m indoors / 30 m outdoors (varies by conditions) | |
| Microcontroller Unit | CPU | Shelly ESP32 C3 |
| Clock frequency | 40 MHz | |
| Flash | 8 MB | |
| Firmware Capabilities | Schedules | 20 |
| Webhooks (URL actions) | 20 with 5 URLs per hook | |
| Scripting | Yes | |
| MQTT | Yes | |
| Advanced Schedules | Yes | |
| KVS (Key-Value Store) | Yes |
Basic Wiring Diagrams
Legend
| Terminals | Description | Wires | Description |
|---|---|---|---|
- | 0–10 VDC negative terminal | L | Live (110–240 V) wire |
+ | 0–10 VDC positive terminal | N | Neutral wire |
O | Relay output | ||
S1 | Switch/button input terminal (light control) | ||
S2 | Switch/button input terminal (light control) | ||
L | Live (110–240 V) terminal | ||
N | Neutral terminal | ||
Dim-/Dim+ | Positive/Negative terminal of LED driver | ||
V-/V+ | Positive/Negative output of LED driver |
Shelly Smart Control
Troubleshooting
...
Components and APIs
Compliance and Certification
Compliance
- Shelly Dimmer 0_1-10V PM Gen3 Multilingual EU Declaration of Conformity (2025-07-22)
- Shelly Dimmer 0_1-10V PM Gen3 AU/NZ Certificate for Suitability
- Shelly Dimmer 0_1-10V PM Gen3 UK PSTI ACT Statement of Compliance
Compliance Archive
Printed User Guide
Installation Guides
Filter by label
There are no items with the selected labels at this time.