Shelly Bluetooth Gateway Gen3 Installation Guide

Prerequisites

Before you start, make sure you have:

Shelly Smart Control app installed on your mobile device.
An active account in the Shelly Cloud.
Bluetooth connectivity enabled on your mobile device.

Installation Steps

Power up the Gateway by plugging it into a standard USB Type A port. The LED indicator lights up in blue, showing that the device is in Access Point mode.
Open the Shelly Smart Control app on your mobile device.
Tap the + icon at the lower-right corner of the screen.
Select Add via Bluetooth, then tap Next.
Select Shelly Bluetooth Gateway Gen3, then tap Next.
Choose the Wi-Fi network to connect the Gateway to, then tap + Add device.

Note:
The LED indicator will turn red, indicating that the device is connecting to the Shelly Cloud.
If you’ve previously added devices and saved the network password, a prompt will appear asking whether you want to connect the new device to the same Wi-Fi network. To change the network, select Edit.

Name the device and choose a picture. Then tap Next.
Add the Gateway to a room of your preference. Alternatively, create a new room and then tap Save.